Activated alumina is an excellent desiccant for drying a wide variety of liquids and gases. Our activated alumina has been developed with high attrition resistance and crush strength, It has larger water adsorption capacity comparing to molecular sieve at high relative humidity and providing long service life with performance at or below dew point specifications. Activated alumina is widely used in large and small dryers. It is appropriate for use in dehydrating gases in both thermally regenerative and pressure swing adsorption (PSA) process.
Technical Specification
| Property | Unit | 1/8” | 3/16” | 1/4” | Note |
| Diameter | mm | 3.0-5.0 | 4.0-6.0 | 5.0-8.0 | |
| Bulk Density | g/ml | 0.70-0.75 | 0.70-0.75 | 0.70-0.75 | Tapped |
| Crush Strength | N | ≥150 | ≥180 | ≥200 | Average 25 beads |
| Static Water Adsorption | wt% | 16.00-18.00 | RH60%, 25℃ | ||
| Specific Surface Area | m2/g | 300-360 | ~ | ||
| Pore volume | cm3/g | 0.38-0.45 | ~ | ||
| Loss on Ignition | wt% | <8.00 | 250-1100℃ | ||
Packing
1. 55 gallon drum;
2. 25 kg bag;
3. Other packing according to your requirement;